Joma/Products/Prefab/Connector pins/Sprint lock

Sprint lock

Connector pin with sprint lock can be used together with support anchors or sandwich lattice girders when connecting two concrete slabs in to a concrete sandwich element.

The connector pins are made out of cold drawn stainless wire EN 1.4301 or stainless acid proof wire EN 1.4401. After the cold drawing process the tensile strength of the wire is ƒyk ≥ 700 MPa.

Connector pin – sprint lock is made with wire diameter 4 and 5 mm. In addition to the standard range below, additional lengths can be manufactured on demand.

Installation

The connector pin is installed with it’s seat facing downwards in the casting bed by slipping it through the reinforcement mesh and finally locked in place with a sprint.

Material

Stainless steel

Documentation

Article no.	Length (mm)	Width (mm)	Weight	Quantity/box
Sprint lock - Stainless steel
Sprint lock 4 mm A2
8140190	160	48	0,048	100
8140141	180	48	0,052	100
8140156	200	48	0,056	100
8140181	220	48	0,060	100
8140150	240	48	0,064	100
8140138	260	48	0,069	100
8140160	280	48	0,073	100
8140139	300	48	0,078	100
8140222	320	48	0,083	100
8140130	400	48	0,099	100
Sprint lock 5 mm A2
8150131	240	48	0,100	100
8150104	260	48	0,106	100
8150068	280	48	0,112	100
8150069	300	48	0,118	100
8150070	320	48	0,124	100
8150106	340	48	0,130	100
8150100	360	48	0,137	100
8150155	380	48	0,143	100
8150166	400	48	0,149	100